Alto-Extremo High End absorber NeoFlex XL in set of 3 in black, new and unused:

You are looking for one of the best and most exclusive equipment feet? The NeoFlex Absorber satisfy both requirements. They are based on the principle of magnetic repulsion. Two extremely strong Neodym-magnets hold the weight of the overlying Hifi-device. Thus the NeoFlex Absorber are an ideal instrument to optimize your High End device. Energy is dissipated by the device perfectly through the absorber and destroyed in the absorber.

• Low profile, yet extremely strong. (There is nothing comparable, worldwide.)
• Step less adjustment and self-leveling. (Therefore can also be used four or more absorbers.)
• Screen caps to avoid disturbances due to the magnetic field. (Suitable for CD-players and turntables.)

Once inserted, you will not want to miss the NeoFlex Absorber, again!

NeoFlex XL

The further development of the NeoFlex BK! The design height has been reduced, and through various optimizations your Hifi-device wins even more on precision and resolution. Golden finish of the Reference-Line! The function has not modified, it also can be infinitely adjusted in height. Two extremely strong Neodym magnets hold the weight of the overlying Hifi-device. The NeoFlex Xl is an ideal tool to optimize your High-End system.

Information for one absorber:

Dimensions:
58 mm high
78 mm diameter

Load capacity:
1,8 -15,0 kg per absorber

Information for one absorber:

Dimensions:
36 mm high
50 mm diameter

Load capacity:
0,5 - 3,7 kg per absorber

Information for one absorber:

Dimensions:
40 mm high
64 mm diameter

Load capacity:
1,2 - 8,0 kg per absorber

Neo-Flex additional Information
Operating instructions:
With the central screw under the absorber, the (right) groove can be adjusted. By using this screw the lower Neodym magnet can be set. If you bring the magnets closer together you can increase the absorber’s load capacity.
The outer (blue) damping ring is for vibration minimalizing. Try the absorber with the damping ring side to the ground and you minimize vibrations from the device and disconnect the ground. If you use the absorber with the damping ring side to the device you disconnect the device and minimize vibrations from the ground. Some equipment should be disconnected, some connected. In this way it is possible to further optimize the absorbers.

Please make note of the following when working with Neodym magnets:
The magnets should not be used near pacemakers, magnetic data storage devices and monitors. Take care not to pinch your skin with the magnets. Do not allow the magnets to smash together as this can cause them to chip. We are not liable for any damage that results from improper use of the magnets. The NeoFlex absorber has a magnet cap, so they can place under each high end devices.

General Information
•Maintain a stable surface
•Set the device feet to the corners of the unit to prevent tipping
•The thread (Lyd I, Lyd II and Exact) is for mounting directly under loudspeakers and hifi-devices. Please don’t place any absorber directly under spikes or serial device feet. Please use absorber in addition (beside) the serial feet or spikes, or change the serial feet with the absorbers
•Classic and NeoFlex have no mounting thread. These feet are placed directly under your hifi-devices
•You can use three or four equipment feet. It depends on the dimensions of the hifi-device or loudspeaker, the load capacity of the equipment feet and their own preference. Both options working as well.